Configure Spinnaker to Access AWS Using IAM User Roles

Overview of deploying applications to AWS

This document will guide you through the following:

• Understanding AWS deployment from Spinnaker^TM

• Configuring Spinnaker to use AWS IAM Instance Roles (if Spinnaker is running on AWS, either via AWS EKS or installed directly on EC2 instances)

  • Creating a Managed Account IAM Role in each of your target AWS Accounts
  • Creating the default BaseIamRole for use when deploying EC2 instances
  • Creating a Managing Account IAM Policy in your primary AWS Account
  • Adding the Managing Account IAM Policy to the existing IAM Instance Role on the AWS nodes
  • Configuring the Managed Accounts IAM Roles to trust the IAM Instance Role from the AWS nodes
  • Adding the Managed Accounts to Spinnaker
  • Adding/Enabling the AWS Cloud Provider to Spinnaker

Prerequisites for deploying to AWS

• You installed Spinnaker with Operator or Halyard.
• You have access to the Spinnaker config files, and a way to apply them (kubectl for Operator or hal for Halyard).
• If you’re using Operator, you have a access to run kubectl commands against the cluster where Spinnaker is installed. If you’re using Halyard, you have access to it.
• You have permissions to create IAM roles using IAM policies and permissions, in all relevant AWS accounts.
  • You should also be able to set up cross-account trust relationships between IAM roles.
• If you want to add the IAM Role to Spinnaker via an Access Key/Secret Access Key, you have permissions to create an IAM User.
• If you want to add the IAM Role to Spinnaker via IAM instance profiles/policies, you have permissions to modify the IAM instance.

All configuration with AWS in this document will be handled via the browser-based AWS Console. All configurations could alternatively be configured via the aws CLI, but this is not currently covered in this document.

Also - you will be granting AWS Power User Access to each of the Managed Account Roles. You could optionally grant fewer permissions, but those more limited permissions are not covered in this document.

Background: Understanding AWS Deployment from Spinnaker

Even if Spinnaker is installed in Kubernetes, it can be used to deploy to other cloud environments, such as AWS. Rather than granting Spinnaker direct access to each of the target AWS accounts, Spinnaker will assume a role in each of the target accounts.

Deploying to AWS EC2

Spinnaker is able to deploy EC2 instances via Auto Scaling Groups.

• Spinnaker’s Clouddriver Pod should be able to assume a Managed Account Role in each deployment target AWS account, and use that role to perform any AWS actions. This may include one or more of the following:
  • Create AWS Launch Configurations and Auto Scaling Groups to deploy AWS EC2 instances
  • Run ECS Containers
  • Run AWS Lambda Actions (alpha/beta as of the time of this document)
  • Create AWS CloudFormation Stacks (alpha/beta as of the time of this document)
• Clouddriver is configured with direct access to a “Managing Account” Policy (it may be helpful to think of this as the Master or Source Policy), which is accomplished in one of two ways:
  • If Spinnaker is running in AWS (either in AWS EKS, or with Kubernetes nodes running in AWS EC2), the Managing Account Policy can be made available to Spinnaker by adding it to the AWS nodes (EC2 instances) where the Spinnaker Clouddriver pod(s) are running.
    • (You can also use Kube2IAM or similar capabilities, but this is not covered in this document)
  • An IAM User with access to the Managing Account Policy can be passed directly to Spinnaker via an Access Key and Secret Access Key
• For each AWS account that you want Spinnaker to be able to deploy to, Spinnaker needs a “Managed Account” Role in that AWS account, with permissions to do the things you want Spinnaker to be able to do (it may be helpful to think of this as a Target Role)
• The Managing Account Role (Source/Master Role) should be able to assume each of the Managed Account Roles (Target Roles). This requires two things:
  • The Managing Account Role needs a permission string for each Managed Account it needs to be able to assume. It may be helpful to think of this as an outbound permission.
  • Each Managed Account needs to have a trust relationship with the Managing Account User or Role to allow the Managing Account User or Role to assume it. It may be helpful to think of this as an inbound permission.

In addition, if you are deploying EC2 instances with AWS, you will need to provide an IAM role for each instance. If you do not specify a role, Spinnaker will attempt to use a role called BaseIAMRole. So you should create a BaseIAMRole (potentially with no permissions).

Deployment scenario

Here’s an example situation:

• We would like Spinnaker to deploy to three AWS accounts, with account IDs 111111111111, 222222222222, and 333333333333. Each of these is a Managed Account
• Choose one account (111111111111), that Spinnaker will log into directly. This is the Managing Account
• We will end up with four IAM entities:
  • A Managing Account User in account 111111111111 (arn:aws:iam::111111111111:user/managingAccount)
  • A Managed Account Role in account 111111111111 (arn:aws:iam::111111111111:role/spinnakerManaged)
  • A Managed Account Role in account 222222222222 (arn:aws:iam::222222222222:role/spinnakerManaged)
  • A Managed Account Role in account 333333333333 (arn:aws:iam::333333333333:role/spinnakerManaged)
• The Managing Account User needs these permissions:
  • The sts:AssumeRole permission for each of the Managed Account Roles
  • The ec2:DescribeAvailabilityZones permission
  • The ec2:DescribeRegions permission
• Each Managed Account Role needs these:
  • PowerUserAccess
  • The iam:PassRole permission for roles that will be assigned to EC2 instances that are being deployed
  • A trust relationship with the Managing Account User (to allow the Managing Account User to assume the Managed Account Role)

Spinnaker configuration examples

• Operator
• Halyard

apiVersion: spinnaker.armory.io/v1alpha2
kind: SpinnakerService
metadata:
  name: spinnaker
spec:
  spinnakerConfig:
    config:
      providers:
        aws:
          enabled: true
          accounts:
          - name: aws-1
            requiredGroupMembership: []
            providerVersion: V1
            permissions: {}
            accountId: '111111111111'
            regions:
            - name: us-east-1
            - name: us-west-2
            assumeRole: role/spinnakerManaged
          - name: aws-2
            requiredGroupMembership: []
            providerVersion: V1
            permissions: {}
            accountId: '222222222222'
            regions:
            - name: us-east-1
            - name: us-west-2
            assumeRole: role/spinnakerManaged
          - name: aws-3
            requiredGroupMembership: []
            providerVersion: V1
            permissions: {}
            accountId: '333333333333'
            regions:
            - name: us-east-1
            - name: us-west-2
            assumeRole: role/spinnakerManaged
          # Because we're baking in 111111111111, this must match the accountName that is associated with 111111111111
          primaryAccount: aws-1
          bakeryDefaults:
            templateFile: aws-ebs-shared.json
            # These creds are for our Baking IAM user in account 111111111111
            awsAccessKey: ABC123
            awsSecretKey: abc123
            baseImages: []
            awsAssociatePublicIpAddress: true
            defaultVirtualizationType: hvm
          accessKeyId: DEF456
          secretAccessKey: def456
          defaultKeyPairTemplate: '{{name}}-keypair'
          defaultRegions:
          - name: us-west-2
          defaults:
            iamRole: BaseIAMRole

aws:
  enabled: true
  accounts:
  - name: aws-1
    requiredGroupMembership: []
    providerVersion: V1
    permissions: {}
    accountId: '111111111111'
    regions:
    - name: us-east-1
    - name: us-west-2
    assumeRole: role/spinnakerManaged
  - name: aws-2
    requiredGroupMembership: []
    providerVersion: V1
    permissions: {}
    accountId: '222222222222'
    regions:
    - name: us-east-1
    - name: us-west-2
    assumeRole: role/spinnakerManaged
  - name: aws-3
    requiredGroupMembership: []
    providerVersion: V1
    permissions: {}
    accountId: '333333333333'
    regions:
    - name: us-east-1
    - name: us-west-2
    assumeRole: role/spinnakerManaged
  # Because we're baking in 111111111111, this must match the accountName that is associated with 111111111111
  primaryAccount: aws-1
  bakeryDefaults:
    templateFile: aws-ebs-shared.json
    baseImages: []
    # These creds are for our Baking IAM user in account 111111111111
    awsAccessKey: ABC123
    awsSecretKey: abc123
    awsAssociatePublicIpAddress: true
    defaultVirtualizationType: hvm
  accessKeyId: DEF456
  secretAccessKey: def456
  defaultKeyPairTemplate: '{{name}}-keypair'
  defaultRegions:
  - name: us-west-2
  defaults:
    iamRole: BaseIAMRole

Configuring Spinnaker to use AWS IAM Roles

If you are not running Spinnaker on AWS, or if you do not want to use AWS IAM roles (or don’t have the ability to modify the roles attached to your Kubernetes instances), you can create an AWS IAM user and provide its credentials to Clouddriver to allow Clouddriver to interact with the various AWS APIs across multiple AWS Accounts.

IAM User Part 1: Creating a Managed Account IAM Role in each your target AWS Accounts

In each account that you want Spinnaker to deploy to, you should create an IAM role for Spinnaker to assume.

For each account you want to deploy to, perform the following:

1. Log in to the browser-based AWS Console

2. Navigate to the IAM page (click on “Services” at the top, then on “IAM” under “Security, Identity, & Compliance”)

3. Click on “Roles” on the left hand side

4. Click on “Create role”

5. For now, for the “Choose the service that will use this role”, select “EC2”. We will change this later, because we want to specify an explicit consumer of this role later on.

6. Click on “Next: Permissions”

7. Search for “PowerUserAccess” in the search filter, and select the Policy called “PowerUserAcces”

8. Click “Next: Tags”

9. Optionally, add tags that will identify this role.

10. Click “Next: Review”

11. Enter a Role Name. For example, “DevSpinnakerManagedRole”. Optionally, add a description, such as “Allows Spinnaker Dev Cluster to perform actions in this account.”

12. Click “Create Role”

13. In the list of Roles, click on your new Role (you may have to scroll down or filter for it).

14. Click on “Add inline policy” (on the right).

15. Click on the “JSON” tab, and paste in this:

    {
        "Version": "2012-10-17",
        "Statement": [
            {
                "Action": [
                    "iam:ListServerCertificates",
                    "iam:PassRole"
                ],
                "Resource": [
                    "*"
                ],
                "Effect": "Allow"
            }
        ]
    }
    

16. Click “Review Policy”

17. Call it “PassRole-and-Certificates”, and click “Create Policy”

18. Copy the Role ARN and save it. It should look something like this: arn:aws:iam::123456789012:role/DevSpinnakerManagedRole. This will be used in the section “IAM User Part 3” and in section “IAM User Part 6”

You will end up with a Role ARN for each Managed / Target account. The Role names do not have to be the same (although it is a bit cleaner if they are). For example, you may end up with roles that look like this:

• arn:aws:iam::123456789012:role/DevSpinnakerManagedRole
• arn:aws:iam::123456789013:role/DevSpinnakerManagedRole
• arn:aws:iam::123456789014:role/DevSpinnakerManaged

IAM User Part 2: Creating the BaseIAMRole for EC2 instances

When deploying EC2 instances, Spinnaker currently requires that you attach a role for each instance (even if you don’t want to grant the instance any special permissions. If you do not specify an instance role, Spinnaker will default to a role called BaseIAMRole, and it will throw an error if this does not exist. Therefore, you should at a minimum create an empty role called BaseIAMRole.

1. Log into the browser-based AWS Console
2. Navigate to the IAM page (click on “Services” at the top, then on “IAM” under “Security, Identity, & Compliance”)
3. Click on “Roles” on the left side
4. Click “Create role”
5. Select “EC2”, and click “Next: Permissions”
6. Click “Next: Tags”
7. Optionally, add tags if required by your organization. Then, click “Next: Review”.
8. Specify the Role Name as “BaseIAMRole”

IAM User Part 3: Creating a Managing Account IAM Policy in your primary AWS account

In the account that Spinnaker lives in (i.e., the AWS account that owns the EKS cluster where Spinnaker is installed), create an IAM Policy with permissions to assume all of your Managed Roles.

1. Log into the AWS account where Spinnaker lives, into the browser-based AWS Console

2. Navigate to the IAM page (click on “Services” at the top, then on “IAM” under “Security, Identity, & Compliance”)

3. Click on “Policies” on the left hand side

4. Click on “Create Policy”

5. Click on the “JSON” tab, and paste in the following:

   {
       "Version": "2012-10-17",
       "Statement": [
           {
               "Effect": "Allow",
               "Action": [
                   "ec2:DescribeAvailabilityZones",
                   "ec2:DescribeRegions"
               ],
               "Resource": [
                   "*"
               ]
           },
           {
               "Action": "sts:AssumeRole",
               "Resource": [
                   "arn:aws:iam::123456789012:role/DevSpinnakerManagedRole",
                   "arn:aws:iam::123456789013:role/spinnakerManaged",
                   "arn:aws:iam::123456789014:role/DevSpinnakerManaged"
               ],
               "Effect": "Allow"
           }
       ]
   }
   

6. Update the sts:AssumeRole block with the list of Managed Roles you created in IAM User Part 1.

7. Click on “Review Policy”

8. Create a name for your policy, such as “DevSpinnakerManagingPolicy”. Optionally, add a descriptive description. Copy the name of the policy. This will be used in the next section, “IAM User Part 4”

9. On the list policies, click your newly-created Policy.

(This policy could also be attached inline directly to the IAM User, rather than creating a standalone policy)

IAM User Part 4: Creating a Managing Account IAM User with access to the Managing Account Policy

The IAM user we’re creating can be in any AWS account, although it may make sense to place it in the same account where Spinnaker lives if Spinnaker is installed in AWS.

1. Log into the AWS account where Spinnaker lives, into the browser-based AWS Console
2. Navigate to the IAM page (click on “Services” at the top, then on “IAM” under “Security, Identity, & Compliance”)
3. Click on “Users” on the left side
4. Click on “Add user”
5. Specify a logical user name, such as “DevSpinnakerManagingAccount”
6. Check the “Programmatic access” checkbox
7. Select “Attach existing policies directly”
8. Find the policy you created in “IAM User Part 2”. and select it with the checkbox.
9. Click “Next: Tags”
10. Optionally, add tags that will identify this user
11. Click “Next: Review”
12. Click “Create user”
13. Copy the “Access key ID” and “Secret access key” (you’ll have to click “Show”). This will be used later, in “IAM User Part 6”
14. Click “Close”
15. Click on the “User name” for the user that you just created.
16. Copy the “User ARN”. This will look something like this: arn:aws:iam::123456789010:user/DevSpinnakerManagingAccount. This will be used in the next section, “IAM User Part 5”

IAM User Part 5: Configuring the Managed Accounts to trust the Managing Account IAM User

Now that we know what user will be assuming each of the Managed Roles, we must configure the Managed Roles (Target Roles) to trust and allow the Managing (Assuming) User to assume them. This is called a “Trust Relationship” and is configured each of the Managed Roles (Target Roles).

For each account you want to deploy to, perform the following:

1. Log into the browser-based AWS Console

2. Navigate to the IAM page (click on “Services” at the top, then on “IAM” under “Security, Identity, & Compliance”)

3. Click on “Roles” on the left hand side

4. Find the Managed Role that you created earlier in this account, and click on the Role Name to edit the role.

5. Click on the “Trust relationships” tab.

6. Click on “Edit trust relationship”

7. Replace the Policy Document with this (Update the ARN with the User ARN from “IAM User Part 4”)

   {
     "Version": "2012-10-17",
     "Statement": [
       {
         "Effect": "Allow",
         "Principal": {
           "AWS": [
             "arn:aws:iam::123456789010:user/DevSpinnakerManagingAccount"
           ]
         },
         "Action": "sts:AssumeRole"
       }
     ]
   }
   

8. Click “Update Trust Policy”, in the bottom right.

IAM User Part 6: Adding the Managing Account User and managed accounts to Spinnaker

The Clouddriver pod(s) should be now able to assume each of the Managed Roles (Target Roles) in each of your Deployment Target accounts. We need to configure Spinnaker to be aware of the accounts and roles it is allowed to consume.

• Operator
• Halyard

apiVersion: spinnaker.armory.io/v1alpha2
kind: SpinnakerService
metadata:
  name: spinnaker
spec:
  spinnakerConfig:
    config:
      providers:
        aws:
          enabled: true
          accounts:
          - name: aws-dev-1                   # Should be a unique name which is used in the Spinnaker UI and API  to identify the deployment target.  For example, aws-dev-1 or aws-dev-2
            requiredGroupMembership: []
            providerVersion: V1
            permissions: {}
            accountId: '111111111111'         # Should be the account ID for the Managed Role (Target Role) you are  assuming.  For example, if the role ARN is arn:aws:iam::123456789012:role/ DevSpinnakerManagedRole, then ACCOUNT_ID would be 123456789012
            regions:                          # Configure the regions you want to deploy to
            - name: us-east-1
            - name: us-west-2
            assumeRole: role/spinnakerManaged # Should be the full role name within the account, including the type of object (role). For example, if the role ARN is arn:aws:iam::123456789012:role/DevSpinnakerManagedRole, then ROLE_NAME would be role/DevSpinnakerManagedRole
          primaryAccount: aws-dev-1
          bakeryDefaults:
            templateFile: aws-ebs-shared.json
            baseImages: []
            awsAssociatePublicIpAddress: true
            defaultVirtualizationType: hvm
            # These creds are for our Baking IAM user in account 111111111111
            awsAccessKey: ABC123
            awsSecretKey: abc123
          accessKeyId: DEF456                 # AWS access key and secret access key from "IAM User Part 4"
          secretAccessKey: def456             # AWS access key and secret access key from "IAM User Part 4"
          defaultKeyPairTemplate: '{{name}}-keypair'
          defaultRegions:
          - name: us-west-2
          defaults:
            iamRole: BaseIAMRole

IAM User Part 7: Adding/Enabling the AWS CloudProvider configuration to Spinnaker

• Operator
• Halyard

kubectl -n <spinnaker namespace> apply -f <SpinnakerService manifest file>

Feedback

Was this page helpful?

Glad to hear it! Please tell us how we can improve.

Sorry to hear that. Please tell us how we can improve.